Most exhausts ship within 2-3 weeks
We only charge sales tax in Florida
This site uses cookies for better user experience and analytics.
--
Days--
Hours--
Mins--
SecsSleek Design and Deep Sound That Turn Heads.
Customer Support
Real Humans, Not Robots – Unless it's a really cool robot, like our chatbot.
Free (or Very Affordable) Shipping Worldwide
We keep shipping prices lower than your idle RPMs. Sometimes even free — like your last burnout.
Performance. Looks. Sound.
Designed to perform. Not just look pretty on Instagram (but it does that too).
Secure Payments
Seriously, not even we can see your card number. (Seriously, we tried.)
My 'short' advice, if you like the look of this exhaust, buy it! You won't find better. 😎
It's pretty loud without the dB killer but it sounds amazing going up through the revs then it pops and bangs a bit on the overrun!! 😁
It looks awesome, everytime I park up at a bike meet it gets attention and compliments.
I have to be honest, I was concerned buying an expensive exhaust that's manufactured in Brazil then shipped to Ireland, if there were any problems it wasn't going to be easy to fix but after looking through reviews I went ahead and ordered one, delivery took about 4-5 weeks
Honestly, the build quality is amazing and the quality of the stainless steel is VERY high standard. It was easy to fit following the easy to understand instructions.
I've used the bike regularly all through an Irish winter and the worst of it's weather and the CS racing downpipes are still as shiny as the day it was fitted. Most other bikes I've had with oem or the other usual exhaust brands, after a few weeks the downpipes get stained, they look terrible and impossible to clean.
Honestly, I can't recommend this and CS racing enough.
Great service. The package arrived in great condition.
Amazing product, high quality, outstanding support, & quick delivery!
ono molto soddisfatto della qualità del prodotto: l’installazione è stata facilissima e l'imballaggio per proteggere il componente era eccellente. Ma l'aspetto più importante è il rumore emesso dal nuovo scarico: non trovo nemmeno le parole per descrivere quanto io sia appagato. Ha un rombo meraviglioso, bilanciato e pulito; guidare la moto è diventato ancora più piacevole grazie a CS Racing. Sul mercato esistono tante opzioni per questo modello, ma consiglierei assolutamente questa.
I had a custom radial damper built for my Ducati Monster 1200R, and I couldn’t be happier with the result.
I had switched from the stock handlebar to a drag bar, which meant the factory damper setup no longer fit. I wasn’t sure what my options were at that point, but CS Racing stepped in and found a solution.
From the beginning, the team was incredibly responsive and willing to go the extra mile to make sure everything would work for my specific bike. Since the 1200R can be a bit tricky when it comes to fitment, especially with modifications, they addressed every detail and delivered a setup that fit perfectly right out of the box.
The quality of the damper is outstanding, and the fit and finish exceeded my expectations. On top of that, the turnaround time was impressively fast for a custom-built component.
It’s rare to find this level of customer service and craftsmanship these days. If you’re considering one of their products, especially for a custom application, I highly recommend them.
Great product, great experience, and it looks absolutely fantastic on the bike.
I ordered a full exhaust system for my bike on 29 December 2025. It was supposed to be my winter project. It arrived 9 February 2026, which wasn't unexpected.
I started the install late February/early March and had a serious fitment issue. The exhaust headers had flanges that are entirely too thick and I noted the nuts wouldn't thread on fully.
At the time I suspected one of the following:
1. The headers were not fully seated. (User error)
2. The flanges are incorrect for my model.
3. The headers were welded incorrectly or for the wrong model.
I opted to torque the nuts, which only threaded on between one and two turns, to 10 pound-feet. The headers did not seat any further, and the nuts only threaded on another turn or two. (The studs were not even flush with the end of the nut at this point) I stop the install, take some pictures, and send it to CS Racing customer support on March 2nd, 2026.
The next day they ask if the nuts are tightened fully to which I told them my 10 pounds-feet setting. They respond "You can tighten them more. Let's see how it sits." They didn't give a torque value. I tightened them to 20 pounds-feet which got another couple of turns. I then went to 30 pounds-feet, which bent a flange and a stud.
Again, I stop the install, take pictures, and send it to customer support. They say "We changed the flanges and we’ll ship a new set to you. Sorry about the inconvenience."
Why ship an exhaust with flanges that are not current? Why tell me to tighten them more, if you already know there was a design change to solve this issue?
I had to replace the studs and overtorqued nuts. CS Racing hasn't helped with this added cost, claiming that I shouldn't have gone so far. But they couldn't be bothered by giving me a torque value.
At this point it's March 9th, and getting into motorcycle season. Not hearing anything, I reach out on the 12th (a Thursday) to see if the flanges have been shipped. Not only have they not, but they told me they will ship on the 16th.
It takes a week to get a customer replacement parts for a manufacturer defect?
I got a shipping notice that replacement headers were shipped March 17th 2026, for a March 25th delivery. On March 22nd I got a follow-up email that the headers have not yet shipped, but was delivered on the 23rd (two weeks later). The new headers are approximately 1/8" shorter than the first set.
Once fitted with the new headers, the exhaust went together as expected. I still can't fathom why CS Racing would send out a kit with headers that were already known not to fit. This install would have been done three weeks earlier if I had the correct headers to begin with, and there wouldn't have been a risk to my engine or studs. I'm out extra cost having to replace studs, and out time having to assemble and disassemble multiple times.
My 'short' advice, if you like the look of this exhaust, buy it! You won't find better. 😎
It's pretty loud without the dB killer but it sounds amazing going up through the revs then it pops and bangs a bit on the overrun!! 😁
It looks awesome, everytime I park up at a bike meet it gets attention and compliments.
I have to be honest, I was concerned buying an expensive exhaust that's manufactured in Brazil then shipped to Ireland, if there were any problems it wasn't going to be easy to fix but after looking through reviews I went ahead and ordered one, delivery took about 4-5 weeks
Honestly, the build quality is amazing and the quality of the stainless steel is VERY high standard. It was easy to fit following the easy to understand instructions.
I've used the bike regularly all through an Irish winter and the worst of it's weather and the CS racing downpipes are still as shiny as the day it was fitted. Most other bikes I've had with oem or the other usual exhaust brands, after a few weeks the downpipes get stained, they look terrible and impossible to clean.
Honestly, I can't recommend this and CS racing enough.
Great service. The package arrived in great condition.
Amazing product, high quality, outstanding support, & quick delivery!
ono molto soddisfatto della qualità del prodotto: l’installazione è stata facilissima e l'imballaggio per proteggere il componente era eccellente. Ma l'aspetto più importante è il rumore emesso dal nuovo scarico: non trovo nemmeno le parole per descrivere quanto io sia appagato. Ha un rombo meraviglioso, bilanciato e pulito; guidare la moto è diventato ancora più piacevole grazie a CS Racing. Sul mercato esistono tante opzioni per questo modello, ma consiglierei assolutamente questa.
